Skoda octavia 1.6 MPI - the car has no power, it does not turn

Поможем новичкам разобраться в тонкостях и деталях работы с USB Autoscope
Ответить
Pido
Сообщения: 6
Зарегистрирован: 01 апр 2011, 20:05

Skoda octavia 1.6 MPI - the car has no power, it does not turn

Сообщение Pido »

I have a problem with this car.
The car has no power, it does not turn.
The car is after the cylinder head restoration.
I did the Px test. Can you please look at the file if the mechanical state of the engine is OK?
Thanks
Вложения
Px35+Longer01.mwf
(5.4 МБ) 504 скачивания
максим68
Сообщения: 3063
Зарегистрирован: 09 июл 2009, 09:02
Благодарил (а): 52 раза
Поблагодарили: 277 раз
Контактная информация:

Re: Skoda octavia 1.6 MPI

Сообщение максим68 »

It seems that the phases are in order, the graph is quite symmetrical. We need to look for other problems.
Pido
Сообщения: 6
Зарегистрирован: 01 апр 2011, 20:05

Re: Skoda octavia 1.6 MPI

Сообщение Pido »

Thanks for answer.
Do you think the pressure in the ring is OK?
Вложения
pressure.jpg
pressure.jpg (299.01 КБ) 2515 просмотров
Аватара пользователя
nikki-car
Сообщения: 2068
Зарегистрирован: 17 сен 2012, 21:21
Благодарил (а): 61 раз
Поблагодарили: 345 раз

Re: Skoda octavia 1.6 MPI

Сообщение nikki-car »

No, this is a defect.
Valve guides must be repaired.
Приборы взяток не берут
Сначала я ко всем отношусь одинаково, а потом так, как кто этого заслуживает
Pido
Сообщения: 6
Зарегистрирован: 01 апр 2011, 20:05

Re: Skoda octavia 1.6 MPI

Сообщение Pido »

Yes, but the engine is after cylinder head restoration!
Аватара пользователя
nikki-car
Сообщения: 2068
Зарегистрирован: 17 сен 2012, 21:21
Благодарил (а): 61 раз
Поблагодарили: 345 раз

Re: Skoda octavia 1.6 MPI

Сообщение nikki-car »

The defect may be in the form of a large gap or too small, when thermal expansion makes the valve movement difficult.
But I am more inclined to think that the overhaul is not fully completed.
Приборы взяток не берут
Сначала я ко всем отношусь одинаково, а потом так, как кто этого заслуживает
максим68
Сообщения: 3063
Зарегистрирован: 09 июл 2009, 09:02
Благодарил (а): 52 раза
Поблагодарили: 277 раз
Контактная информация:

Re: Skoda octavia 1.6 MPI

Сообщение максим68 »

Check the same fuel pressure and mechanisms in the intake manifold.
Pido
Сообщения: 6
Зарегистрирован: 01 апр 2011, 20:05

Re: Skoda octavia 1.6 MPI

Сообщение Pido »

I check fuel pressure => 2.5 Bar => OK
MAF is new.
And motor no have power and shoots into the suction line.
максим68
Сообщения: 3063
Зарегистрирован: 09 июл 2009, 09:02
Благодарил (а): 52 раза
Поблагодарили: 277 раз
Контактная информация:

Re: Skoda octavia 1.6 MPI

Сообщение максим68 »

Either a poor mixture, or a late ignition, - the ignition will be discarded.
The cylinder pressure test shows the norm.
Check for the ingress of non-standard air into the intake of the smoke generator.
Ответить

Вернуться в «Помощь начинающим»